GROUP 12 - 1952 BUICK SHEET METAL 12-1 DESCRIPTION OF 1952 BUICK SHEET METAL 1952 Buick Front End Sheet Metal Assembly The 1952 Buick front end sheet metal assembly consists of front fenders and skirts, radiator grille frame, radiator mounting strap and radiator core, radiator pan, outside air intake ducts which are attached to the fender skirts, [...]
SECTION 13-E 1951 BUICK CONVERTIBLE COUPE BODIES 13-21 OPERATION AND CARE OF FOLDING TOP The folding tops on 1951 Buick convertible coupes are operated by the Hydro-Lectric Power System described in Section 13-F. The following instructions should be observed by anyone operating the top to raise and lower it. Lowering the Top and Installing Boot STOP [...]
SECTION 13-C 1951 BUICK WINDSHIELD WIPERS - CLOSED BODY WINDSHIELD, WINDOW GLASSES AND VENTILATORS 13-10 WINDSHIELD WIPERS Description of 1951 Buick Windshield Wiper On Series 40, the windshield wiper motor is mounted under the cowl and is connected to the two windshield wiper transmissions by flat steel links. On Series 50-70, the windshield wiper motor [...]
12-1 DESCRIPTION OF 1951 BUICK SHEET METAL Front End Sheet Metal Assembly The front end sheet metal assembly consists of front fenders and skirts, radiator grille frame, radiator mounting strap and radiator core, radiator pan, outside air intake ducts which are attached to the fender skirts, and attaching parts. The parts of the front end [...]
1959 BUICK REAR QUARTER TRIM AND HARDWARE 3-1 DESCRIPTION The 1959 Buick rear quarter trim and hardware for all body styles except convertible coupe hardware is entirely new and requires new service procedures. Figures 3-1, 3-2, and 3-3 are phantom views which identify and show the relationship of major component parts of the 1959 Buick [...]
1956 Buick Body Styles PAINT COLORS Following is a preliminary list of the DuPont "DUCO" Lacquer stock numbers, and color combination used on 1956 models. As soon as the Du Pont color charts are available they will be attached to a subsequent BPS Bulletin. 1956 Buick Paint Colors 1956 INTERIOR [...]
SECTION 13-C 1958 BUICK REAR QUARTER (SERIES 40-60) 13-10 1958 BUICK REAR QUARTER TRIM (SERIES 40-60) Removal and Installation of 1958 Buick Rear Quarter Belt Finishing Molding (Models 46R-48-66R) Remove rear seat cushion and seat back. Remove belt finishing molding attaching screws and remove molding. To install, reverse removal procedure. Removal and Installation of 1958 Buick Rear [...]
SECTION 13-C 1957 BUICK REAR QUARTER (SERIES 40-60) 13-10 1957 BUICK REAR QUARTER TRIM (SERIES 40-60) Removal and Installation of 1957 Buick Rear Quarter Belt Finishing Molding (Models 46R-48-66R) Remove 1957 Buick rear seat cushion and seat back. Remove belt finishing molding attaching screws and remove molding. To install, reverse removal procedure. Removal and Installation [...]
SECTION 13-L 1957 BUICK REAR QUARTER (SERIES 50-70) 13-34 1957 BUICK REAR QUARTER TRIM (SERIES 50-70) Removal and Installation of 1957 Buick Rear Quarter Belt Finishing Molding (Convertibles) Lower folding top. Remove molding attaching screws and remove molding. To install, reverse removal procedure. Removal and Installation of 1957 Buick Rear Quarter Belt Finishing Molding (Models [...]
SECTION 13-D 1950 BUICK INTERIOR TRIM AND SEATS 13-18 1950 BUICK DOOR TRIM PAD REMOVAL AND INSTALLATION Remove all door inside handles by pushing inward on the escutcheon and removing the handle retaining spring, using Door Handle Pliers KMO 601. A slight rotating motion of the pliers will easily remove the retaining spring. See figure [...]