SECTION 13-E 1952 BUICK INTERIOR TRIM AND SEATS 13-19 1952 BUICK DOOR TRIM PAD REMOVAL AND INSTALLATION Removal of 1952 Buick Door Trim Pad Remove all door inside handle by pushing inward on the escutcheon and removing the handle retaining spring, using Door Handle Pliers KMO 601. A slight rotating motion of the pliers will easily [...]
SECTION 13-D 1951 BUICK INTERIOR TRIM AND SEATS 13-16 DOOR TRIM PAD REMOVAL AND INSTALLATION Removal of Door Trim Pad Remove all door inside handles by pushing inward on the escutcheon and removing the handle retaining spring, using Door Handle Pliers KMO 601. A slight rotating motion of the pliers will easily remove the retaining [...]
6-1 DESCRIPTION The 1959 Buick headlining assembly is formed to the roof contour by concealed listing wires. The ends of each listing wire are installed in holes in the side roof rail. The wire and listing pocket at the front roof bow are secured to the bow with bend-over metal tabs. The 1959 Buick headlining [...]
SECTION 13-M 1958 BUICK HEADLINING AND SEATS (SERIES 50-70-700) 13-36 1958 BUICK HEADLINING (SERIES 50-70-700) The 1958 Buick headlining in Series 50-70-700 bodies is serviced the same as the 1958 Buick headlining in Series 40-60 bodies. For removal and installation procedures, see paragraph 13-12 for all series bodies. 13-37 1958 BUICK SEATS (SERIES 50-70-700) 1958 Buick Front [...]
SECTION 13-D 1958 BUICK HEADLINING AND SEATS 13-12 1958 BUICK HEADLINING (ALL SERIES) On the 1958 Buick "40" and "60" Series bodies the headlining is formed to the roof panel contour by concealed listing wires or by a combination of concealed listing wires and exposed roof bows. The 1958 Buick headlining is secured at the windshield [...]
SECTION 13-M 1957 BUICK HEADLINING AND SEATS (SERIES 50-70) 13-36 1957 BUICK HEADLINING (SERIES 50-70) The 1957 Buick headlining in Series 50-70 bodies is serviced the same as the headlining in Series 40-60 bodies. For removal and installation procedures, see paragraph 13-12 for all series bodies. 13-37 1957 BUICK SEATS (SERIES 50-70) 1957 Buick [...]
SECTION 13-D 1957 BUICK HEADLINING AND SEATS 13-12 1957 BUICK HEADLINING (ALL SERIES) On the 1957 Buick "40" and "60" Series bodies the headlining is formed to the roof panel contour by concealed listing wires or by a combination of concealed listing wires and exposed roof bows. The 1957 Buick headlining is secured at the [...]
SECTION 13-C 1957 BUICK REAR QUARTER (SERIES 40-60) 13-10 1957 BUICK REAR QUARTER TRIM (SERIES 40-60) Removal and Installation of 1957 Buick Rear Quarter Belt Finishing Molding (Models 46R-48-66R) Remove 1957 Buick rear seat cushion and seat back. Remove belt finishing molding attaching screws and remove molding. To install, reverse removal procedure. Removal and Installation [...]
SECTION 13-L 1957 BUICK REAR QUARTER (SERIES 50-70) 13-34 1957 BUICK REAR QUARTER TRIM (SERIES 50-70) Removal and Installation of 1957 Buick Rear Quarter Belt Finishing Molding (Convertibles) Lower folding top. Remove molding attaching screws and remove molding. To install, reverse removal procedure. Removal and Installation of 1957 Buick Rear Quarter Belt Finishing Molding (Models [...]
SECTION 13-D 1950 BUICK INTERIOR TRIM AND SEATS 13-18 1950 BUICK DOOR TRIM PAD REMOVAL AND INSTALLATION Remove all door inside handles by pushing inward on the escutcheon and removing the handle retaining spring, using Door Handle Pliers KMO 601. A slight rotating motion of the pliers will easily remove the retaining spring. See figure [...]