SECTION 13-M 1958 BUICK HEADLINING AND SEATS (SERIES 50-70-700) 13-36 1958 BUICK HEADLINING (SERIES 50-70-700) The 1958 Buick headlining in Series 50-70-700 bodies is serviced the same as the 1958 Buick headlining in Series 40-60 bodies. For removal and installation procedures, see paragraph 13-12 for all series bodies. 13-37 1958 BUICK SEATS (SERIES 50-70-700) 1958 Buick Front [...]
SECTION 13-N 1958 BUICK REAR END (SERIES 50-70-700) 13-38 1958 BUICK BACK WINDOW (SERIES 50-70-700) The 1958 Buick back window assembly consists of a large one-piece glass secured in the body opening by a one-piece rubber channel. It is designed to form a Vee at the rear quarter area. The 1958 Buick back window garnish moldings are [...]
SECTION 13-L 1958 BUICK REAR QUARTER (SERIES 50-70-700) 13-34 1958 BUICK REAR QUARTER TRIM (SERIES 50-70-700) Removal and Installation of 1958 Buick Rear Quarter Belt Finishing Molding (Convertibles) Lower folding top. Remove molding attaching screws and remove molding. To install, reverse removal procedure. Removal and Installation of 1958 Buick Rear Quarter Belt Finishing Molding (Models 56R-76R-755) Remove [...]
SECTION 13-K 1958 BUICK DOORS AND CENTER PILLAR (SERIES 50-70-700) 13-30 1958 BUICK FRONT AND REAR DOORS (SERIES 50-70-700) Several changes have been incorporated in the design of the 1958 Buick rear doors hardware parts which require new service methods. All 1958 Buick doors are equipped with a waterproof door inner panel water deflector which is cemented [...]
SECTION 13-O 1957 BUICK EXTERIOR MOLDINGS (SERIES 50-70) 13-40 REMOVAL AND INSTALLATION OF 1957 BUICK EXTERIOR MOLDINGS (SERIES 50-70} The 1957 Buick exterior moldings are secured by any one or a combination of clips, screws, bolt and clip assemblies, and joint plates. Before removing any molding which has to be pried from the body, apply [...]
SECTION 13-N 1957 BUICK REAR END (SERIES 50-70) 13-38 1957 BUICK BACK WINDOW (SERIES 50-70) The 1957 Buick back window assembly consists of a large one-piece glass secured in the body opening by a one-piece rubber channel, and is designed to form a "Vee" at the 1957 Buick rear quarter areas as shown in Fig. [...]
SECTION 13-M 1957 BUICK HEADLINING AND SEATS (SERIES 50-70) 13-36 1957 BUICK HEADLINING (SERIES 50-70) The 1957 Buick headlining in Series 50-70 bodies is serviced the same as the headlining in Series 40-60 bodies. For removal and installation procedures, see paragraph 13-12 for all series bodies. 13-37 1957 BUICK SEATS (SERIES 50-70) 1957 Buick [...]
SECTION 13-L 1957 BUICK REAR QUARTER (SERIES 50-70) 13-34 1957 BUICK REAR QUARTER TRIM (SERIES 50-70) Removal and Installation of 1957 Buick Rear Quarter Belt Finishing Molding (Convertibles) Lower folding top. Remove molding attaching screws and remove molding. To install, reverse removal procedure. Removal and Installation of 1957 Buick Rear Quarter Belt Finishing Molding (Models [...]
SECTION 13-K 1957 BUICK DOORS AND CENTER PILLAR (SERIES 50-70) 13-30 1957 BUICK FRONT AND REAR DOORS (SERIES 50-70) Many changes have been incorporated in the design of the front and rear doors which require new service methods. All 1957 Buick doors are equipped with a waterproof door inner panel water deflector which is sealed [...]