10-1 1959 BUICK EXTERIOR MOULDINGS - DESCRIPTION The 1959 Buick exterior mouldings are secured by any one or a combination of clips, screws, bolt and clip assemblies and joint plates. Before removing any molding which has to be pried from the body, apply a strip of masking tape to the painted surface adjacent to the [...]
SECTION 13-N 1958 BUICK REAR END (SERIES 50-70-700) 13-38 1958 BUICK BACK WINDOW (SERIES 50-70-700) The 1958 Buick back window assembly consists of a large one-piece glass secured in the body opening by a one-piece rubber channel. It is designed to form a Vee at the rear quarter area. The 1958 Buick back window garnish moldings are [...]
SECTION 13-E 1958 BUICK REAR END (SERIES 40-60) 13-14 1958 BUICK BACK WINDOW ASSEMBLY (SERIES 40-60) The 1958 Buick back window assembly consists of a large one-piece glass which is secured in place in the body opening by a one-piece rubber channel. The 1958 Buick back window garnish moldings consist of an upper garnish molding and a [...]
SECTION 13-N 1957 BUICK REAR END (SERIES 50-70) 13-38 1957 BUICK BACK WINDOW (SERIES 50-70) The 1957 Buick back window assembly consists of a large one-piece glass secured in the body opening by a one-piece rubber channel, and is designed to form a "Vee" at the 1957 Buick rear quarter areas as shown in Fig. [...]
SECTION 13-E 1957 BUICK REAR END (SERIES 40-60) 13-14 1957 BUICK BACK WINDOW (SERIES 40-60) The 1957 Buick back window area is entirely new in design consisting of a center and two side glass assemblies. Each assembly includes a glass and a one-piece rubber channel, and is installed from inside the body into a separate [...]