SECTION 13-D 1952 BUICK DOOR AND REAR QUARTER WINDOWS AND VENTILATORS 13-14 1952 BUICK DOOR AND REAR QUARTER WINDOWS-CLOSED BODIES NOTE: See paragraph 13-15 for Riviera and paragraph 13-16 for Convertible body windows. Description of 1952 Buick Windows Each 1952 Buick door and rear quarter window has a safety plate glass which slides vertically in felt glass [...]
SECTION 13-K 1957 BUICK DOORS AND CENTER PILLAR (SERIES 50-70) 13-30 1957 BUICK FRONT AND REAR DOORS (SERIES 50-70) Many changes have been incorporated in the design of the front and rear doors which require new service methods. All 1957 Buick doors are equipped with a waterproof door inner panel water deflector which is sealed [...]
SECTION 13-B 1957 BUICK DOORS AND CENTER PILLAR (SERIES 40-60) 13-6 1957 BUICK FRONT AND REAR DOORS (SERIES 40-60) Several new changes have been incorporated in the design of the front and rear door hardware parts. Some of these parts, such as window frames on the 41 and 48 bodies and the 1957 Buick door [...]
SERIES 70 All 1952 Series 70 models make use of advanced insulating methods designed to reduce engine and road noise and contribute greater to passenger comfort (illustrated in Figure 48). 1952 Buick Body Insulation Under hood insulation has been quadrupled so that nearly 100% of the hood surface is covered, and the thickness [...]
1950 BUICK DOOR OUTSIDE HANDLE REMOVAL Release the 1950 Buick door rubber weatherstrip at the lock pillar face to expose flat spring handle retainer. Remove screw holding retainer to pillar face. Pull retainer out until handle can be removed. 1950 Buick Door Outside Handle Removal INSTALLATION Door lock bolt by pushing to "up" [...]