SECTION 13-B - 1956 BUICK DOORS AND COMPARTMENT LIDS 13-5 1956 BUICK DOOR LOCKS AND HANDLES Description of 1956 Buick Door Locks and Handles Each 1956 Buick door lock is operated by a push button in the stationary outside handle and also by an inside handle and remote control assembly which is connected to the [...]
SECTION 13-B 1952 BUICK DOORS AND COMPARTMENT LIDS 13-5 1952 BUICK DOOR LOCKS AND HANDLES Description of 1952 Buick Door Locks and Handles Each 1952 Buick door lock is operated by a push button in the stationary outside handle and also by an inside handle and remote control assembly which is connected to the lock by a [...]
SECTION 13-A INTRODUCTION, CARE OF 1951 BUICK BODY, COMPOUNDS, BODY MOUNTINGS 13-1 INTRODUCTION Scope of Group 13 Group 13 contains the most essential adjustment and replacement procedures required for ordinary servicing of bodies. These procedures may be performed by any competent mechanic without specialized experience in 1951 Buick body repair work, and may be accomplished with [...]
SECTION 7-C 1959 BUICK CONVERTIBLE ROOF RAIL WEATHERSTRIPS 7-5 DESCRIPTION The sealing along each folding top side roof rail is accomplished by a front, center and rear section of weatherstrip. These weatherstrips are attached to the side roof rails with nuts on the three integral studs of each weatherstrip section. In addition, both ends of [...]
SECTION 4-C - 1959 BUICK ESTATE WAGON TAIL GATE 4-6 DESCRIPTION The 1959 Buick tail gate and tail gate hardware on the 1959 Estate wagons is entirely new and requires new service procedures. All 1959 Buick tail gates incorporate either a manually operated or electrically operated tail gate window which can be lowered into the [...]
SECTION 4-B 1959 BUICK REAR COMPARTMENT 4-3 1959 BUICK REAR COMPARTMENT LID AND HINGES The 1959 Buick rear compartment lid employs two (2) torsion rods between the hinge assemblies as a counterbalance and hold open for the lid. Notches are provided at the hinge assemblies for rod adjustment. The rear compartment lid lock employs the [...]
SECTION 2-A 1959 BUICK FRONT AND REAR DOORS 2-1 DESCRIPTION Extensive changes have been incorporated in the 1959 Buick front and rear doors. These changes, in most instances, require new and varied service procedures. The primary items of importance, due to their differences in design, removal and installation, are as follows: 1959 Buick Front and [...]
1956 Buick Body Styles PAINT COLORS Following is a preliminary list of the DuPont "DUCO" Lacquer stock numbers, and color combination used on 1956 models. As soon as the Du Pont color charts are available they will be attached to a subsequent BPS Bulletin. 1956 Buick Paint Colors 1956 INTERIOR [...]
SECTION 13-N 1958 BUICK REAR END (SERIES 50-70-700) 13-38 1958 BUICK BACK WINDOW (SERIES 50-70-700) The 1958 Buick back window assembly consists of a large one-piece glass secured in the body opening by a one-piece rubber channel. It is designed to form a Vee at the rear quarter area. The 1958 Buick back window garnish moldings are [...]
SECTION 13-E 1958 BUICK REAR END (SERIES 40-60) 13-14 1958 BUICK BACK WINDOW ASSEMBLY (SERIES 40-60) The 1958 Buick back window assembly consists of a large one-piece glass which is secured in place in the body opening by a one-piece rubber channel. The 1958 Buick back window garnish moldings consist of an upper garnish molding and a [...]