SECTION 6-C - 1959 BUICK POSITIVE TRACTION DIFFERENTIAL 6-14 DESCRIPTION OF 1959 BUICK POSITIVE TRACTION DIFFERENTIAL General Description The 1959 Buick Positive Traction (non-spin) differential is optional in all series Buicks. It consists of a new type differential case assembly which is used in place of the conventional case assembly. All rear axle parts other [...]
SECTION 6-B - 1959 BUICK REAR AXLE SERVICE PROCEDURES 6-4 REMOVAL AND INSTALLATION OF 1959 BUICK REAR AXLE ASSEMBLY It is not necessary to remove the 1959 Buick rear axle assembly for repair or replacement of a strut rod, an axle shaft, a wheel bearing, or a wheel bearing seal ; however, the 1959 Buick [...]
SECTION 6-A 1959 BUICK REAR AXLE SPECIFICATIONS, DESCRIPTION, TROUBLE DIAGNOSIS 6-1 1959 BUICK REAR AXLE SPECIFICATIONS Tightening Specifications Use a reliable torque wrench to tighten the parts listed, to insure proper tightening without straining or distorting parts. These 1959 Buick rear axle specifications are for clean and lightly lubricated threads only; dry or dirty threads [...]
SECTION 6-B 1958 BUICK REAR AXLE SERVICE PROCEDURES 6-4 REMOVAL AND INSTALLATION OF 1958 BUICK REAR AXLE ASSEMBLY It is not necessary to remove the 1958 Buick rear axle assembly for repair or replacement of a strut rod, an axle shaft, a wheel bearing, or a wheel bearing seal; however, the 1958 Buick rear axle [...]
SECTION 6-A 1958 BUICK REAR AXLE SPECIFICATIONS, DESCRIPTION, TROUBLE DIAGNOSIS 6-1 1958 BUICK REAR AXLE SPECIFICATIONS Tightening Specifications Use a reliable torque wrench to tighten the parts listed, to insure proper tightening without straining or distorting parts. These 1958 Buick rear axle specifications are for clean and lightly lubricated threads only; dry or dirty threads [...]
SECTION 6-B 1957 BUICK REAR AXLE SERVICE PROCEDURES 6-4 REMOVAL AND INSTALLATION OF 1957 BUICK REAR AXLE ASSEMBLY It is not necessary to remove the 1957 Buick rear axle assembly for repair or replacement of a strut rod, an axle shaft, a wheel bearing, or a wheel bearing seal; however, the 1957 Buick rear axle [...]
SECTION 6-A 1957 BUICK REAR AXLE SPECIFICATIONS, DESCRIPTION, TROUBLE DIAGNOSIS 6-1 1957 BUICK REAR AXLE SPECIFICATIONS Tightening Specifications Use a reliable torque wrench to tighten the parts listed, to insure proper tightening without straining or distorting parts. These 1957 Buick Rear Axle specifications are for clean and lightly lubricated threads only; dry or dirty threads [...]
SECTION 6-B 1956 BUICK REAR AXLE SERVICE PROCEDURES 6-4 REMOVAL AND INSTALLATION OF 1956 BUICK REAR AXLE ASSEMBLY It is not necessary to remove the 1956 Buick rear axle assembly for repair or replacement of a strut rod, an axle shaft, a wheel bearing, or a wheel bearing seal; however, the 1956 Buick rear axle [...]
SECTION 6-A 1956 BUICK REAR AXLE SPECIFICATIONS, DESCRIPTION, TROUBLE DIAGNOSIS 6-1 1956 BUICK REAR AXLE SPECIFICATIONS Tightening Specifications Use a reliable torque wrench to tighten the parts listed, to insure proper tightening without straining or distorting parts. These 1956 Buick rear axle specifications are for clean and lightly lubricated threads only; dry or dirty threads [...]
SECTION 6-B 1955 BUICK REAR AXLE SERVICE PROCEDURES 6-4 REMOVAL AND INSTALLATION OF 1955 BUICK REAR AXLE ASSEMBLY It is not necessary to remove the 1955 Buick rear axle assembly for any of the repairs outlined in this section; however, these procedures can be used as outlined if the assembly is removed from the car. The [...]