SECTION 10-E 1959 BUICK CRANKING (STARTER) SYSTEM 10-29 THE 1959 BUICK CRANKING (STARTER) SYSTEM General Description The 1959 Buick cranking system permits the engine to be cranked by turning the ignition switch on and depressing the accelerator pedal. While accelerator pedal is depressed the 1959 Buick cranking motor continues operation until the engine starts running [...]
SECTION 10-E 1958 BUICK CRANKING SYSTEM 10-29 THE 1958 BUICK CRANKING (STARTER) SYSTEM General Description The 1958 Buick cranking system permits the engine to be cranked by turning the ignition switch on and depressing the accelerator pedal. While accelerator pedal is depressed the 1958 Buick cranking motor continues operation until the engine starts running on [...]
SECTION 6-B 1958 BUICK REAR AXLE SERVICE PROCEDURES 6-4 REMOVAL AND INSTALLATION OF 1958 BUICK REAR AXLE ASSEMBLY It is not necessary to remove the 1958 Buick rear axle assembly for repair or replacement of a strut rod, an axle shaft, a wheel bearing, or a wheel bearing seal; however, the 1958 Buick rear axle [...]
SECTION 10-E 1957 BUICK CRANKING (STARTER) SYSTEM 10-29 THE 1957 BUICK CRANKING (STARTER) SYSTEM General Description The 1957 Buick cranking system permits the engine to be cranked by turning the ignition switch on and depressing the accelerator pedal. While accelerator pedal is depressed the cranking motor continues operation until the engine starts running on its [...]
SECTION 6-B 1957 BUICK REAR AXLE SERVICE PROCEDURES 6-4 REMOVAL AND INSTALLATION OF 1957 BUICK REAR AXLE ASSEMBLY It is not necessary to remove the 1957 Buick rear axle assembly for repair or replacement of a strut rod, an axle shaft, a wheel bearing, or a wheel bearing seal; however, the 1957 Buick rear axle [...]
SECTION 6-B 1956 BUICK REAR AXLE SERVICE PROCEDURES 6-4 REMOVAL AND INSTALLATION OF 1956 BUICK REAR AXLE ASSEMBLY It is not necessary to remove the 1956 Buick rear axle assembly for repair or replacement of a strut rod, an axle shaft, a wheel bearing, or a wheel bearing seal; however, the 1956 Buick rear axle [...]
SECTION 6-B 1955 BUICK REAR AXLE SERVICE PROCEDURES 6-4 REMOVAL AND INSTALLATION OF 1955 BUICK REAR AXLE ASSEMBLY It is not necessary to remove the 1955 Buick rear axle assembly for any of the repairs outlined in this section; however, these procedures can be used as outlined if the assembly is removed from the car. The [...]
SECTION 6-B 1954 BUICK REAR AXLE SERVICE PROCEDURES 6-4 REMOVAL AND INSTALLATION OF 1954 BUICK REAR AXLE ASSEMBLY It is not necessary to remove the 1954 Buick rear axle assembly for any of the repairs outlined in this section; however, these procedures can be used as outlined if the assembly is removed from the car. The [...]
SECTION 5-C 1952 BUICK REAR AXLE REMOVAL AND DISASSEMBLY PROCEDURES 5-7 REMOVAL AND INSTALLATION OF 1952 BUICK REAR AXLE ASSEMBLY When to Remove - 1952 Buick Rear Axle Assembly The 1952 Buick rear axle assembly should be removed from the car before overhaul if there is external indication of damage to rear axle or third member housings [...]
GROUP 5 - 1953 BUICK REAR AXLE ASSEMBLY 5-1 1953 BUICK REAR AXLE CHANGES The 1953 Buick rear axle assembly is essentially the same design as the 1952 rear axle assembly; however, a number of changes were made which affect interchangeability of parts and some service procedures. This section will describe the changes and their related [...]