SECTION 6-B - 1959 BUICK REAR AXLE SERVICE PROCEDURES 6-4 REMOVAL AND INSTALLATION OF 1959 BUICK REAR AXLE ASSEMBLY It is not necessary to remove the 1959 Buick rear axle assembly for repair or replacement of a strut rod, an axle shaft, a wheel bearing, or a wheel bearing seal ; however, the 1959 Buick [...]
SECTION 6-B 1958 BUICK REAR AXLE SERVICE PROCEDURES 6-4 REMOVAL AND INSTALLATION OF 1958 BUICK REAR AXLE ASSEMBLY It is not necessary to remove the 1958 Buick rear axle assembly for repair or replacement of a strut rod, an axle shaft, a wheel bearing, or a wheel bearing seal; however, the 1958 Buick rear axle [...]
SECTION 6-B 1957 BUICK REAR AXLE SERVICE PROCEDURES 6-4 REMOVAL AND INSTALLATION OF 1957 BUICK REAR AXLE ASSEMBLY It is not necessary to remove the 1957 Buick rear axle assembly for repair or replacement of a strut rod, an axle shaft, a wheel bearing, or a wheel bearing seal; however, the 1957 Buick rear axle [...]
SECTION 6-B 1956 BUICK REAR AXLE SERVICE PROCEDURES 6-4 REMOVAL AND INSTALLATION OF 1956 BUICK REAR AXLE ASSEMBLY It is not necessary to remove the 1956 Buick rear axle assembly for repair or replacement of a strut rod, an axle shaft, a wheel bearing, or a wheel bearing seal; however, the 1956 Buick rear axle [...]
SECTION 6-B 1955 BUICK REAR AXLE SERVICE PROCEDURES 6-4 REMOVAL AND INSTALLATION OF 1955 BUICK REAR AXLE ASSEMBLY It is not necessary to remove the 1955 Buick rear axle assembly for any of the repairs outlined in this section; however, these procedures can be used as outlined if the assembly is removed from the car. The [...]
SECTION 7-C 1954 BUICK CHASSIS SUSPENSION SERVICE, ADJUSTMENT, AND REPLACEMENT PROCEDURES 7-8 1954 BUICK TIRE SERVICE AND INSPECTION 1954 Buick Tire Inflation Maintenance of correct inflation pressure in all tires is one of the most important elements of tire care. Correct tire pressure is also of great importance to ease of handling and riding comfort. Overinflation is [...]
SECTION 6-C 1952 BUICK CHASSIS SUSPENSION REPAIR OPERATIONS 6-13 REPLACE AND ADJUST 1952 BUICK STABILIZER LINK GROMMETS The construction of the 1952 Buick stabilizer links is clearly shown in figure 6-15. 1952 Buick Front Stabilizer Link-Sectional View To disassemble, remove nut from lower end of the link rod, then remove rod, spacer, retainers, and grommets. [...]
SECTION 5-C 1952 BUICK REAR AXLE REMOVAL AND DISASSEMBLY PROCEDURES 5-7 REMOVAL AND INSTALLATION OF 1952 BUICK REAR AXLE ASSEMBLY When to Remove - 1952 Buick Rear Axle Assembly The 1952 Buick rear axle assembly should be removed from the car before overhaul if there is external indication of damage to rear axle or third member housings [...]
SECTION 5-C 1951 BUICK REAR AXLE REMOVAL AND DISASSEMBLY PROCEDURES 5-7 1951 BUICK REAR AXLE ASSEMBLY REMOVAL AND INSTALLATION When to Remove Rear Axle Assembly The 1951 Buick rear axle assembly should be removed from the car before overhaul if there is external indication of damage to rear axle or third member housings or strut rods, or [...]
6-1 REAR AXLE SPECIFICATIONS Tightening Specifications Use a reliable torque wrench to tighten the parts listed, to insure proper tightening without straining or distorting parts. These specifications are for clean and lightly lubricated threads only; dry or dirty threads produce increased friction which prevents accurate measurement of tightness. 1956 Buick Rear Axle Specifications [...]