SECTION 13-B 1957 BUICK DOORS AND CENTER PILLAR (SERIES 40-60) 13-6 1957 BUICK FRONT AND REAR DOORS (SERIES 40-60) Several new changes have been incorporated in the design of the front and rear door hardware parts. Some of these parts, such as window frames on the 41 and 48 bodies and the 1957 Buick door [...]
SECTION 13-H 1957 BUICK LUBRICATION (ALL SERIES) 13-24 BODY PARTS LUBRICATED TWICE A YEAR (ALL SERIES) The movable mechanical hardware parts of the body are lubricated at the factory to insure proper and quiet operation. Because of the frequent use of some parts such as door locks and door lock strikers, it is important that [...]
SECTION 13-D 1950 BUICK INTERIOR TRIM AND SEATS 13-18 1950 BUICK DOOR TRIM PAD REMOVAL AND INSTALLATION Remove all door inside handles by pushing inward on the escutcheon and removing the handle retaining spring, using Door Handle Pliers KMO 601. A slight rotating motion of the pliers will easily remove the retaining spring. See figure [...]
SECTION 13-B 1950 BUICK DOORS AND COMPARTMENT LIDS 13-5 1950 BUICK DOOR LOCKS AND HANDLES Description of 1950 Buick Door Locks and Handles Each door lock is operated by a push button in the stationary outside handle and also by an inside handle and remote control assembly which is connected to the lock by a link. [...]
1950 BUICK DOOR OUTSIDE HANDLE REMOVAL Release the 1950 Buick door rubber weatherstrip at the lock pillar face to expose flat spring handle retainer. Remove screw holding retainer to pillar face. Pull retainer out until handle can be removed. 1950 Buick Door Outside Handle Removal INSTALLATION Door lock bolt by pushing to "up" [...]