Home » Cylinder
2014 2014/11

1957 Buick Engine Parts Replacement

By |Categories: 1957, 1957 Buick Chassis Manual, Literature|Tags: , , , , , , , , , , , , , , , , , , , , , , , |0 Comments

SECTION 2-E 1957 BUICK ENGINE PARTS REPLACEMENT - CRANKSHAFT AND CONNECTING ROD BEARINGS, PISTONS AND RINGS 2-17 1957 BUICK - REPLACEMENT OF CONNECTING ROD BEARINGS A 1957 Buick connecting rod bearing consists of two halves or shells which are alike and interchangeable in rod and cap. When the shells are placed in rod and cap [...]

2014 2014/11

1956 Buick Cylinder Head and Valve Mechanism Service

By |Categories: 1956, 1956 Buick Shop Manual, Literature|Tags: , , , , , , , , , , , , , , , , , , , , |0 Comments

SECTION 2-D 1956 BUICK CYLINDER HEAD AND VALVE MECHANISM SERVICE 2-14 1956 BUICK CYLINDER HEAD AND VALVE SERVICE Removal of 1956 Buick Cylinder Head Drain the radiator and cylinder block. Remove air cleaner and silencer, then disconnect all pipes from carburetor and intake manifold. Disconnect wires from accelerator vacuum switch, remove coil, remove throttle return [...]

2014 2014/11

1954 Buick Cylinder Head and Valve Mechanism Service

By |Categories: 1954, 1954 Buick Shop Manual, Literature|Tags: , , , , , , , , , , , , , |0 Comments

SECTION 2-D 1954 BUICK CYLINDER HEAD AND VALVE MECHANISM SERVICE 2-14 1954 BUICK CYLINDER HEAD AND VALVE SERVICE Removal of 1954 Buick Cylinder Head Drain the radiator and 1954 Buick cylinder block. Remove air cleaner and silencer, then disconnect all pipes from carburetor and intake manifold. Disconnect wires from accelerator vacuum switch, remove coil, remove throttle return [...]

2014 2014/11

1953 Buick Cylinder Head and Valve Mechanism Service

By |Categories: 1953, 1953 Buick Shop Manual, Literature|Tags: , , , , , , , , , , , |0 Comments

SECTION 2-D - 1953 BUICK CYLINDER HEAD AND VALVE MECHANISM SERVICE 2-14 1953 BUICK V-8 CYLINDER HEAD AND VALVE SERVICE Removal of 1953 Buick Cylinder Head Drain the 1953 Buick radiator and 1953 Buick cylinder block. Remove air cleaner and silencer, then disconnect all pipes from carburetor and intake manifold. Disconnect wires from the accelerator vacuum switch and [...]

2014 2014/11

1953 Buick Engine Description

By |Categories: 1953, 1953 Buick Shop Manual, Literature|Tags: , , , , , , , , , , , , , , , , , , |0 Comments

SECTION 2-B 1953 BUICK ENGINE DESCRIPTION 2-4 1953 BUICK ENGINES AND MOUNTINGS Series 40 Engine The 1953 Buick Series 40 is equipped with an "F 263" 8-in-line engine similar to the one used in 1952. For 1953 Buick production, slight changes in the shape of all piston heads and cylinder head combustion chambers have provided increased [...]

2014 2014/11

1951 Buick Brake Service

By |Categories: 1951, 1951 Buick Shop Manual, Literature|Tags: , , , , , , , , , , , , , |0 Comments

SECTION 8-C 1951 BUICK BRAKE SERVICE AND ADJUSTMENT PROCEDURES 8-8 FILLING 1951 BUICK BRAKE MASTER CYLINDER The fluid level must be maintained at 1/2" to 1" below top of master cylinder filler opening at all times. Low fluid level in master cylinder reservoir may permit air to be pumped into the brake pipes and wheel [...]

2014 2014/11

1951 Buick Cylinder Head and Valve Mechanism Service

By |Categories: 1951, 1951 Buick Shop Manual, Literature|Tags: , , , , , , , , , , , , , |0 Comments

SECTION 2-D 1951 BUICK CYLINDER HEAD AND VALVE MECHANISM SERVICE 2-14 1951 BUICK VALVE LASH ADJUSTMENT NOTE: This procedure applies only on Series 40 engines used with Synchromesh transmissions; these engines have plain sleeve valve lifters. All other 1951 Buick engines have hydraulic valve lifters, indicated by a label on rocker arm cover, stating "This Engine [...]

2014 2014/11

1956 Buick Engine Service

By |Categories: 1956, 1956 Buick Product Service Bulletins Abridged Edition, Literature|Tags: , , , , , , , , , , , , , , , , , , |0 Comments

ENGINE SPECIFICATION 1956 Buick Engine Specification   ENGINE ASSEMBLIES The following engine assemblies will be available for direct shipment to dealers from Flint: 1956 Buick Engine Assemblies These engines do not include the air cleaner, generator, generator brace, ignition coil, distributor cap and wires, fan, fan driven pulley, fan hub, fan [...]

2014 2014/11

1950 Buick Cylinder Head and Valve Mechanism Service

By |Categories: 1950, 1950 Buick Shop Manual, Literature|Tags: , , , , , , , , , , , , |0 Comments

SECTION 2-D 1950 BUICK CYLINDER HEAD AND VALVE MECHANISM SERVICE 2-14 VALVE LASH ADJUSTMENT NOTE: This procedure applies only on Series 40 engines used with Synchromesh transmissions; these engines have plain sleeve valve lifters. All other engines have hydraulic valve lifters, indicated by a label on rocker arm cover, stating-"This Engine Equipped with Hydraulic Lifters.'' [...]

2014 2014/03

1953 Buick Fireball V-8 Engine

By |Categories: 1953, 1953 Buick Product School Manual, Literature|Tags: , , , , , , , , , |0 Comments

The large bore and short stroke with use of short connecting rods, combined with the V-type cylinder arrangement, permits a very compact 1953 Buick fireball engine design of minimum height, width, length and weight. The new 1953 Buick fireball engine is 13.6 inches shorter and weighs 213 pounds less than the 1952 Series 70 8-in-line [...]

By continuing to use the site, you agree to our privacy policy and the use of cookies. More Information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close