2014 2014/12

1956 Buick Replacement of Engine Parts

2017-03-01T19:22:17+00:00By |Categories: 1956, 1956 Buick Shop Manual, Literature|Tags: , , , , , , , , , , , , , , , , |0 Comments

SECTION 2-E 1956 BUICK REPLACEMENT OF ENGINE PARTS - CRANKSHAFT AND CONNECTING ROD BEARINGS, PISTONS AND RINGS 2-17 1956 BUICK REPLACEMENT OF CONNECTING ROD BEARINGS A 1956 Buick connecting rod bearing consists of two halves or shells which are alike and interchangeable in rod and cap. When the shells are placed in rod and cap [...]

2014 2014/11

1959 Buick Engine Mounting Adjustment and Flywheel Replacement

2017-03-01T19:22:33+00:00By |Categories: 1959, 1959 Buick Chassis Manual, Literature|Tags: , , , , , , , , , , , , , , , , , |0 Comments

SECTION 2-G - 1959 BUICK ENGINE MOUNTING ADJUSTMENT, FLYWHEEL REPLACEMENT, ENGINE BALANCING 2-25 1959 BUICK ENGINE MOUNTING ADJUSTMENT The 1959 Buick engine and transmission when properly aligned with the frame will rest in a normal position which does not impose any shear strain on the rubber mounting pads. During assembly, the transmission support is accurately [...]

2014 2014/11

1959 Buick Engine Cooling and Oiling Systems

2017-03-01T19:22:33+00:00By |Categories: 1959, 1959 Buick Chassis Manual, Literature|Tags: , , , , , , , , , , , , , , , , , , , , |0 Comments

SECTION 2-F - 1959 BUICK ENGINE COOLING AND OILING SYSTEMS SERVICE 2-20 1959 BUICK ENGINE COOLING SYSTEM SERVICES Checking and Filling 1959 Buick Engine Cooling System The coolant level should be checked only when the 1959 Buick engine is cold and only enough coolant should be added to bring the level to the line marked [...]

2014 2014/11

1959 Buick Engine Parts Replacement

2017-03-01T19:22:33+00:00By |Categories: 1959, 1959 Buick Chassis Manual, Literature|Tags: , , , , , , , , , , , , , , , , , , |0 Comments

SECTION 2-E - 1959 BUICK ENGINE PARTS REPLACEMENT - CRANKSHAFT AND CONNECTING ROD BEARINGS, PISTONS AND RINGS 2-17 REPLACEMENT OF 1959 BUICK CONNECTING ROD BEARINGS A connecting rod bearing consists of two halves or shells which are alike and interchangeable in rod and cap. When the shells are placed in rod and cap the ends [...]

2014 2014/11

1959 Buick Engine Tune Care and Trouble Diagnosis

2017-03-01T19:22:34+00:00By |Categories: 1959, 1959 Buick Chassis Manual, Literature|Tags: , , , , , , , , , , , , , , , , , , |0 Comments

SECTION 2-C - 1959 BUICK ENGINE TUNE-CARE AND TROUBLE DIAGNOSIS 2-10 1959 BUICK ENGINE TUNE-CARE The purpose of a 1959 Buick engine tune care is to restore power and performance that has been lost through wear, corrosion, or deterioration of one or more parts or units. In the normal operation of an engine these changes take [...]

2014 2014/11

1959 Buick Engine Description

2017-03-01T19:22:34+00:00By |Categories: 1959, 1959 Buick Chassis Manual, Literature|Tags: , , , , , , , , , , , , , , , , , , , , , , |0 Comments

SECTION 2-B 1959 BUICK ENGINE DESCRIPTION 2-4 1959 BUICK ENGINES AND MOUNTINGS 1959 Buick Engines in Each Series The 1959 Buick V-8 engines used in all series are of the same basic design, differing in displacement, compression ratio, power, carburetor equipment and manifolding. 1959 Buick Engine End Sectional View The 1959 Buick Series [...]

2014 2014/11

1959 Buick Engine Specifications

2017-03-01T19:22:35+00:00By |Categories: 1959, 1959 Buick Chassis Manual, Literature|Tags: , , , , , , , , , |0 Comments

SECTION 2-A 1959 BUICK ENGINE SPECIFICATIONS 2-1 ENGINE TIGHTENING SPECIFICATIONS Use a reliable torque wrench to tighten the parts listed, to insure proper tightness without straining or distorting parts. These 1959 Buick engine specifications are for clean and lightly lubricated threads only; dry or dirty threads produce increased friction which prevents accurate measurement of tightness. [...]

2014 2014/11

1958 Buick Engine Parts Replacement

2017-03-01T19:22:49+00:00By |Categories: 1958, 1958 Buick Chassis Manual, Literature|Tags: , , , , , , , , , , , , , , , |0 Comments

SECTION 2-E 1958 BUICK ENGINE PARTS REPLACEMENT - CRANKSHAFT AND CONNECTING ROD BEARINGS, PISTONS AND RINGS 2-17 REPLACEMENT OF 1958 BUICK CONNECTING ROD BEARINGS A connecting rod bearing consists of two halves or shells which are alike and interchangeable in rod and cap. When the shells are placed in rod and cap the ends extend [...]

2014 2014/11

1958 Buick Engine Mounting Adjustment and Flywheel Replacement

2017-03-01T19:22:50+00:00By |Categories: 1958, 1958 Buick Chassis Manual, Literature|Tags: , , , , , , , , , , , |0 Comments

SECTION 2-G 1958 BUICK ENGINE MOUNTING ADJUSTMENT, FLYWHEEL REPLACEMENT, ENGINE BALANCING 2-25 1958 BUICK ENGINE MOUNTING ADJUSTMENT The engine and transmission when properly aligned with the frame of the car, must rest in a normal position which does not impose any shear strain on any of the rubber mounting pads. The following procedure should be [...]

2014 2014/11

1958 Buick Cylinder Head and Valve Mechanism

2017-03-01T19:22:50+00:00By |Categories: 1958, 1958 Buick Chassis Manual, Literature|Tags: , , , , , , , , , , , , , , , |0 Comments

SECTION 2-D 1958 BUICK CYLINDER HEAD AND VALVE MECHANISM SERVICE 2-14 1958 BUICK CYLINDER HEAD AND VALVE SERVICE Removal of 1958 Buick Cylinder Head Drain the 1958 Buick radiator and cylinder block. Remove air cleaner and silencer, then disconnect all pipes and hoses from carburetor and intake manifold. Disconnect wires from accelerator vacuum switch, remove [...]

Go to Top