SECTION 2-G - 1959 BUICK ENGINE MOUNTING ADJUSTMENT, FLYWHEEL REPLACEMENT, ENGINE BALANCING 2-25 1959 BUICK ENGINE MOUNTING ADJUSTMENT The 1959 Buick engine and transmission when properly aligned with the frame will rest in a normal position which does not impose any shear strain on the rubber mounting pads. During assembly, the transmission support is accurately [...]
SECTION 2-G 1957 BUICK ENGINE MOUNTING ADJUSTMENT, FLYWHEEL REPLACEMENT, ENGINE BALANCING 2-25 1957 BUICK ENGINE MOUNTING ADJUSTMENT The 1957 Buick engine and transmission assembly must rest in a .normal position which does not impose any side strain on the three rubber mounting pads. The following procedure may be used to obtain proper adjustment of the [...]
13-1 1954 BUICK BODY SERVICE INFORMATION, IDENTIFICATION NUMBERS 1954 Buick Body Service Information Detailed 1954 Buick body service information is given in the Field Service Bulletins published by the Fisher Body Service Division. Each of these bulletins that relate to Buick body service is furnished to Buick dealers through the Buick Service Department. All issues of the [...]
SECTION 2-G SERVICE ON 1952 BUICK ENGINE MOUNTINGS, FLYWHEEL AND HOUSING 2-31 1952 BUICK ENGINE MOUNTING ADJUSTMENT The following procedure must be used to center the engine in the frame and adjust the engine and transmission mountings. Disconnect torque tube from torque ball. Tighten 1952 Buick engine mounting brackets to the crankcase and frame front X [...]
SECTION 2-G SERVICE ON 1950 BUICK ENGINE MOUNTINGS, FLYWHEEL AND HOUSING 2-31 1950 BUICK ENGINE MOUNTING ADJUSTMENT The following procedure must be used to center the engine in the frame and adjust the 1950 Buick engine mountings and transmission mountings. Disconnect torque tube from torque ball. Tighten 1950 Buick engine mounting brackets to the crankcase [...]