2014 2014/10

1954 Buick Body Maintenance

2017-03-01T19:25:46+00:00By |Categories: 1954, 1954, 1954 Buick Product Service Bulletins Abridged Edition, Literature|Tags: , , , , , , , , , , , , , , , , , , , , , , |0 Comments

1954 BUICK BODY STYLES 1954 Buick Body Styles   1954 BUICK TRIM COMBINATIONS 1954 Buick Trim Combinations 1954 Buick Interior Trim Combinations 1954 Buick Interior Trims   1954 BUICK PAINT COMBINATION 1954 Buick Paint Combinations # Available for the Skylark only * Convertible and Special [...]

2014 2014/10

1957 Buick Body Information and Maintenance

2017-03-01T19:25:50+00:00By |Categories: 1957, 1957, 1957 Buick Product Service Bulletins AE, Literature|Tags: , , , , , , , , , , , , , , , , , , , |0 Comments

1957 BUICK BODY STYLES 1957 Buick Body Styles   HEADLINER REFINISHING INFO. 1957 Estate Wagon Requests have been received regarding the proper semi -gloss lacquer colors to use on 1957 Estate Wagon headliners. There are four colors available. The "Duco" mixing machine formula matches for the colors are as follows: 1957 Buick [...]

2014 2014/10

1950 Buick Rear Compartment Lid

2017-03-01T19:25:55+00:00By |Categories: 1950 Buick Fisher Body for Series 40|Tags: , , , , , |0 Comments

1950 BUICK REAR COMPARTMENT LID Cover lower roof panel below back window to protect finish and raise compartment lid. Disconnect and remove light wire from lid. Scribe position of hinge straps on lid. Remove two (2) retaining bolts from each hinge strap and remove lid. Use care to prevent damaging the body finish. To replace, [...]

2014 2014/02

1950 Buick Body Maintenance

2017-03-01T19:26:08+00:00By |Categories: 1950, 1950, 1950 Buick Product Service Bulletins Abridged Edition, Literature|Tags: , , , , , , , , , |0 Comments

We have received many requests for installation instructions and a list of parts required to install lower side mouldings on Model 43, 46 and 46S jobs, not originally equipped with the mouldings. Installation of these mouldings cannot be made in a hap-hazard manner. Very accurate retaining clip locations are required so that the mouldings will [...]

Go to Top