Home » Bumper
2014 2014/11

1959 Buick Frame and Sheet Metal

By |Categories: 1959, 1959 Buick Chassis Manual, Literature|Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , |0 Comments

GROUP 12 1959 BUICK FRAME AND SHEET METAL 12-1 CHECKING ALIGNMENT OF 1959 BUICK FRAME AND SUSPENSION When a 1959 Buick frame has been damaged by accident the following procedure may be used to check alignment of the 1959 Buick frame, and the alignment of the chassis suspension members with the frame. This procedure should [...]

2014 2014/11

1958 Buick Frame and Sheet Metal

By |Categories: 1958, 1958 Buick Chassis Manual, Literature|Tags: , , , , , , , , , , , , , , , , , , |1 Comment

GROUP 12 - 1958 BUICK FRAME AND SHEET METAL 12-1 CHECKING ALIGNMENT OF 1958 BUICK FRAME Checking Alignment of 1958 Buick Frame and Suspension Members When a 1958 Buick frame has been damaged by accident the following procedure may be used to check alignment of the 1958 Buick frame, and the alignment of the [...]

2014 2014/11

1957 Buick Frame and Sheet Metal

By |Categories: 1957, 1957 Buick Chassis Manual, Literature|Tags: , , , , , , , , , , , , , , , , , , , , |0 Comments

GROUP 12 - 1957 BUICK FRAME AND SHEET METAL 12-1 CHECKING ALIGNMENT OF 17 BUICK FRAME Checking Alignment of 1957 Buick Frame and Suspension Members When a 1957 Buick frame has been damaged by accident the following procedure may be used to check alignment of the frame, and the alignment of the chassis suspension members [...]

2014 2014/11

1950 Buick Frame and Bumpers

By |Categories: 1950, 1950 Buick Shop Manual, Literature|Tags: , , , , , , , , |0 Comments

GROUP 9 - 1950 BUICK FRAME AND BUMPERS 9-1 DESCRIPTION OF 1950 BUICK FRAME The 1950 Buick frame has high carbon pressed steel members riveted and welded together to form a rigid assembly. The outer and inner side rails, center diagonal cross members and rear cross members are of channel section. The front cross member [...]

2014 2014/10

1953 Buick Frame & Bumpers Maintenance

By |Categories: 1953, 1953, 1953 Buick Product Service Bulletins, Literature|Tags: , , , , , , |0 Comments

1953 Buick Frame SPRING & SHIM CAMPAIGN 1953 - 76X SKYLARK Special Service Letter - Dealer No. 124 A change in the front suspension has been made in production on all 70 Series cars to improve appearance and ride. This change is to be campaigned on all Skylark (76X) models prior to Serial [...]

2014 2014/10

1951 Buick Frame & Bumpers Maintenance

By |Categories: 1951, 1951, 1951 1952 Buick Product Service Bulletins, Literature|Tags: , , , , , , , , |0 Comments

BUMPER BOLT TORQUE In order to obtain satisfactory results with a bumper jack it is imperative that the bumper back bar to frame bolts be torqued to recommended figures. Loose bolts at these points will allow the bumpers to twist upward far enough to make rear wheel removal difficult or even impossible. Correct torque specifications [...]

2014 2014/10

1957 Buick Chassis Suspension Maintenance

By |Categories: 1957, 1957, 1957 Buick Product Service Bulletins AE, Literature|Tags: , , , , , , , , , , , , |0 Comments

CHASSIS SPRINGS CORRECT DOMESTIC SPRING APPLICATIONS FOR ALL 1957 MODELS ARE AS FOLLOWS: FRONT SPRINGS 1957 Buick Chassis-Front Springs REAR SPRINGS 1957 Buick Chassis-Rear Springs   SHOCK ABSORBERS THE CORRECT SHOCK ABSORBERS APPLICATION FOR ALL 1957 MODELS ARE AS FOLLOWS: FRONT 1957 Buick Front Shock Absorbers REAR 1957 [...]

By continuing to use the site, you agree to our privacy policy and the use of cookies. More Information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close