SECTION 10-H 1952 BUICK SIGNAL SYSTEMS 10-58 1952 BUICK STOP LIGHTS AND SWITCH The 1952 Buick stop lights are incorporated in the combination tail, stop, and direction signal lamps. These lamps and the replacement of bulbs are covered in paragraph 10-56. The 1952 Buick stop lights are controlled by a hydraulic switch mounted on the brake pipe [...]
SECTION 10-H - 1953 BUICK SIGNAL SYSTEM NOTE: For Series 40 6-volt systems refer to Section 10-H in the 1952 Buick Shop Manual. 10-52 1953 BUICK HORNS AND CONTROL CIRCUIT 1953 Buick Horns and Relay Two Delco-Remy electrically operated vibrator type horns are mounted in front of the radiator. Both 1953 Buick horns are operated simultaneously [...]
SECTION 10-H 1951 BUICK SIGNAL SYSTEMS 10-58 1951 BUICK STOP LIGHTS AND SWITCH The stop lights are incorporated in the combination tail, stop, and direction signal lamps. These lamps and the replacement of bulbs are covered in paragraph 10-56. The stop lights are controlled by a hydraulic switch mounted on the brake pipe distributor fitting [...]
7-1 1951 BUICK STEERING GEAR AND TIE ROD SPECIFICATIONS Tightening Specifications Use a reliable torque wrench to tighten the parts listed to insure proper tightness without straining or distorting parts. These specifications are for clean and lightly lubricated threads only; dry or dirty threads produce increased friction which prevents accurate measurement of tightness. 1951 [...]
SECTION 10-H 1950 BUICK SIGNAL SYSTEMS 10-58 1950 BUICK STOP LIGHTS AND SWITCH The stop lights are incorporated in the combination tail, stop, and direction signal lamps. These lamps and the replacement of bulbs are covered in paragraph 10-56. The stop lights are controlled by a hydraulic switch mounted on the brake pipe distributor fitting [...]