SECTION 1-B - 1959 BUICK BEARING SERVICE (BALL AND ROLLER) The instructions in this Section cover removal, installation, cleaning and inspection of all ball and roller bearings used in the various units of the vehicle. These instructions must be carefully followed to avoid failure of 1959 Buick bearings after any repair work in which they [...]
SECTION 1-B 1958 BUICK BEARING SERVICE (BALL AND ROLLER) The instructions in this Section cover removal, installation, cleaning and inspection of all ball and roller bearings used in the various units of the vehicle. These instructions must be carefully followed to avoid failure of bearings after any repair work in which they are involved. 1-9 [...]
SECTION 1-B 1957 BUICK BEARING SERVICE (BALL AND ROLLER) The instructions in this Section cover removal, installation, cleaning and inspection of all ball and roller bearings used in the various units of the vehicle. These instructions must be carefully followed to avoid failure of 1957 Buick bearings after any repair work in which they are [...]
SECTION 1-B 1956 BUICK BEARING SERVICE (BALL AND ROLLER) The instructions in this Section cover removal, installation, cleaning and inspection of all ball and roller bearings used in the various units of the vehicle. These instructions must be carefully followed to avoid failure of bearings after any repair work in which they are involved. [...]
SECTION 1-B 1955 BUICK BEARING SERVICE (BALL AND ROLLER) The instructions in this Section cover removal, installation, cleaning and inspection of all ball and roller bearings used in the various units of the vehicle. These instructions must be carefully followed to avoid failure of bearings after any repair work in which they are involved. [...]
GROUP 1 - 1954 BUICK LUBRICARE AND BEARING SERVICE 1-1 EVERY 1000 MILES-CHASSIS AND BODY 1954 Buick Chassis Lubricare Check engine oil level only after engine has been stopped for at least three to five minutes to allow oil to drain down. The oil level should be maintained between the "FULL" and "ADD" marks on gauge [...]
SECTION 1-B 1952 BUICK BEARING SERVICE (BALL AND ROLLER) The instructions in this Section cover removal, installation, cleaning and inspection of all ball and roller bearings used in the various units of the vehicle. These instructions must be carefully followed to avoid failure of 1952 Buick bearings after any repair work in which they are involved. [...]
SECTION 1-B 1951 BUICK BEARING SERVICE (BALL AND ROLLER) The instructions in this Section cover removal, installation, cleaning and inspection of all ball and roller bearings used in the various units of the vehicle. These instructions must be carefully followed to avoid failure of 1951 Buick bearings after any repair work in which they are involved. [...]
1-1 1950 Buick Bearing Service - EVERY 1000 MILES-CHASSIS AND BODY Chassis Lubricare Engine. Check engine oil level after allowing time for oil to drain down ( 5 min.) . The oil level should be maintained at all times within 1 quart of the "Full" arrow, or not lower than the middle hole in gauge [...]