SECTION 13-I 1958 BUICK EXTERIOR MOLDINGS (ALL SERIES) 13-26 REMOVAL AND INSTALLATION OF 1958 BUICK EXTERIOR MOLDINGS The 1958 Buick exterior moldings are secured by any one or a combination of clips, screws, bolt and clip assemblies and joint plates. Before removing any molding which has to be pried from the body, apply a strip of [...]
SECTION 13-J 1958 BUICK FRONT END 13-27 1958 BUICK WINDSHIELD (SERIES 50-70-700) 1958 Buick Windshield Reveal Moldings (Except Convertibles) The 1958 Buick windshield reveal moldings consist of the following parts; 1958 Buick windshield upper reveal molding; windshield side reveal molding, right and left; and windshield lower reveal molding, right and left. The upper reveal molding is secured to [...]
SECTION 13-H 1958 BUICK LUBRICATION (ALL SERIES) 13-24 BODY PARTS LUBRICATED TWICE A YEAR (ALL SERIES) The movable mechanical hardware parts of the body were lubricated at the factory to insure proper and quiet operation. Because of the frequent use of some parts such as door locks and door lock strikers, it is important that these [...]
SECTION 13-A INTRODUCTION, CARE OF 1958 BUICK BODY, AND SERIES 40-60 FRONT END 13-1 INTRODUCTION General Information This manual contains the essential removal, installation, adjustment, and maintenance procedures necessary for ordinary servicing of the Fisher bodies on 1958 Buick automobiles. These procedures can be performed by any competent mechanic without specialized experience in 1958 Buick body [...]