Home » Turbine
2014 2014/11

1959 Buick Triple Turbine Transmission Removal and Installation

By |Categories: 1959, 1959 Buick Chassis Manual, Literature|Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , |1 Comment

SECTION 5-F - 1959 BUICK TRIPLE TURBINE TRANSMISSION REMOVAL AND INSTALLATION DISASSEMBLY AND ASSEMBLY 5-36 REMOVAL AND INSTALLATION OF TRIPLE TURBINE TRANSMISSION 1959 Buick Triple Turbine Transmission Removal Hoist front and rear of car and rest it solidly on stands placed under frame. Frame side rail should be at least 20" above floor. Disconnect track [...]

2014 2014/11

1956 Buick Dynaflow Transmission Specifications

By |Categories: 1956, 1956 Buick Shop Manual, Literature|Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , |0 Comments

SECTION 5-A 1956 BUICK DYNAFLOW TRANSMISSION SPECIFICATIONS, DESCRIPTION AND OPERATION 5-1 1956 BUICK DYNAFLOW GENERAL SPECIFICATIONS 1956 Buick Dynaflow Transmission Identification Number A production identification number is stamped into the lower edge of the reaction shaft flange directly to rear of the high (left) accumulator. The identification number consists of a letter followed by a [...]

2014 2014/11

1955 Buick Dynaflow Transmission Specifications

By |Categories: 1955, 1955 Buick Shop Manual, Literature|Tags: , , , , , , , , , , , , , , , , , , , , , , , |0 Comments

SECTION 5-A 1955 BUICK DYNAFLOW SPECIFICATIONS, DESCRIPTION AND OPERATION 5-1 1955 BUICK DYNAFLOW GENERAL SPECIFICATIONS 1955 Buick Dynaflow Transmission Identification Number A production identification number is stamped into the lower edge of the reaction shaft flange directly to rear of the high (left) accumulator. The identification number consists of a letter followed by a number. See [...]

2014 2014/11

1954 Buick Dynaflow Transmission Specifications

By |Categories: 1954, 1954 Buick Shop Manual, Literature|Tags: , , , , , , , , , , , , , , , , , , , , , , |0 Comments

SECTION 5-A 1954 BUICK DYNAFLOW SPECIFICATIONS, DESCRIPTION AND OPERATION 5-1 1954 BUICK DYNAFLOW TRANSMISSION SPECIFICATIONS 1954 Buick Dynaflow Transmission Identification Number A production identification number is stamped into the lower edge of the reaction shaft flange directly to rear of the high (left) accumulator. The identification number consists of a letter followed by a number. See figure [...]

2014 2014/11

1952 Buick Dynaflow Transmission

By |Categories: 1952, 1952 Buick Shop Manual, Literature|Tags: , , , , , , , , , , , , , , , , , , , , |0 Comments

SECTION 4-C 1952 BUICK DYNAFLOW SPECIFICATIONS, DESCRIPTION, AND OPERATION 4-15 1952 BUICK DYNAFLOW GENERAL SPECIFICATIONS 1952 Buick Dynaflow Transmission Identification Number A production identification number is stamped into the lower edge of the reaction shaft flange directly to rear of the high (left) accumulator. The identification number consists of a letter followed by a number. See [...]

2014 2014/11

1951 Buick Dynaflow Transmission Maintenance

By |Categories: 1951, 1951 Buick Shop Manual, Literature|Tags: , , , , , , , , , , , , , , , , , , |0 Comments

SECTION 4-C 1951 BUICK DYNAFLOW SPECIFICATIONS, DESCRIPTION, AND OPERATION 4-15 1951 BUICK DYNAFLOW GENERAL SPECIFICATIONS 1951 Buick Dynaflow Transmission Identification Number A production identification number is stamped into the lower edge of the reaction shaft flange directly to rear of the high (left) accumulator. The identification number consists of a letter followed by a number. See [...]

By continuing to use the site, you agree to our privacy policy and the use of cookies. More Information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close