SECTION 3-F 1951 BUICK STROMBERG CARBURETOR AND AUTOMATIC CHOKE 3-25 1951 BUICK STROMBERG CARBURETOR IDENTIFICATION NUMBERS 1951 Buick Stromberg carburetors have the following model and code numbers: 1951 Buick Stromberg Carburetor Identifcation Numbers The model designation indicates the basic design of the unit. The code number which is stamped on the float bowl [...]
SECTION 3-A 1951 BUICK ENGINE FUEL AND EXHAUST SYSTEMS SPECIFICATIONS AND DESCRIPTION 3-1 SPECIFICATIONS Tightening Specifications Use a reliable torque wrench to tighten the parts listed, to insure proper tightness without straining or distorting parts. These specifications are for clean and lightly lubricated threads only; dry or dirty threads produce increased friction which prevents accurate [...]
CARBURETOR SPECIFICATIONS CHANGES 1956 Following are the latest carburetor specifications for 1956. Rather than list the individual changes, we are reprinting the specifications for the Carter, Stromberg and Rochester Carburetors; therefore, the information on carburetor specifications listed in BPS 2.396 should be disregarded. NOTE: Only those items identified by an asterisk are affected by the [...]
SECTION 10-E 1950 BUICK CRANKING (STARTER) SYSTEM 10-31 THE 1950 BUICK CRANKING (STARTER) SYSTEM General Description The 1950 Buick cranking system permits the engine to be cranked and started automatically, after the ignition has been turned on, by pressing down on the accelerator pedal. The 1950 Buick cranking motor circuit is automatically opened and the cranking motor [...]
SECTION 3-F 1950 BUICK STROMBERG CARBURETOR AND AUTOMATIC CHOKE 3-25 1950 BUICK STROMBERG CARBURETOR IDENTIFICATION NUMBERS Stromberg carburetors used on 1950 engines have the following model and code numbers: The model designation indicates the basic design of the unit. The code number which is stamped on the float bowl cover (air horn) directly above the [...]
SECTION 3-A 1950 BUICK ENGINE FUEL AND EXHAUST SYSTEMS SPECIFICATIONS AND DESCRIPTION 3-1 SPECIFICATIONS Tightening Specifications Use a reliable torque wrench to tighten the parts listed, to insure proper tightness without straining or distorting parts. These specifications are for clean and lightly lubricated threads only; dry or dirty threads produce increased friction which prevents accurate [...]