SECTION 3-G 1954 BUICK STROMBERG 2-BARREL CARBURETOR AND AUTOMATIC CHOKE 3-24 DESCRIPTION AND OPERATION OF 1954 BUICK STROMBERG 2-BARREL CARBURETOR General Description The AAVB Stromberg carburetor used on Series 40-50 engines is a 2-barrel down draft type. See figure 3-56. 1954 Buick Stromberg AAVB Carburetor Assembly It contains a float system, idle (low [...]
SECTION 10-E 1952 BUICK CRANKING (STARTER) SYSTEM 10-31 THE 1952 BUICK CRANKING (STARTER) SYSTEM General Description The 1952 Buick cranking system permits the engine to be cranked by turning the ignition switch on and depressing the accelerator pedal. While accelerator pedal is depressed the cranking motor continues operation until the engine starts running on its own [...]
SECTION 3-H 1952 BUICK STROMBERG 4-BARREL CARBURETOR 3-32 DESCRIPTION AND OPERATION OF 1952 BUICK STROMBERG 4-BARREL CARBURETOR General Description The Stromberg Model 4AUV-267 carburetor used on the Series 70 engine is a 4-barrel downdraft type which provides the advantages of a compound installation of two 2-barrel carburetors in one compact unit. See figure 3-82. To [...]
SECTION 3-G 1952 BUICK STROMBERG 2-BARREL CARBURETOR 3-27 DESCRIPTION AND OPERATION OF 1952 BUICK STROMBERG 2-BARREL CARBURETOR General Description The AAUVB Stromberg carburetor used on Series 40-50 engines is a 2-barrel down draft type. See figure 3-59. 1952 Buick Stromberg AAUVB Carburetor Assembly It contains a float system, idle (low speed) system, main [...]
SECTION 3-A 1952 BUICK ENGINE FUEL AND EXHAUST SYSTEMS SPECIFICATIONS AND GENERAL DESCRIPTION 3-1 SPECIFICATIONS General Specifications 1952 Buick General Engine and Fuel Specifications 1952 Buick General Engine and Fuel Specification 1952 Buick Carter Carburetor and Choke Calibrations 1952 Buick Carter Carburetor and Choke Calibrations Specifications IMPORTANT: Calibrations are governed [...]
SECTION 10-E 1953 BUICK CRANKING (STARTER) SYSTEM NOTE: This section applies to the Series 50-70 12-volt cranking system. For Series 40 6-volt cranking information refer to Section 10-E in the 1952 Buick Shop Manual. 10-28 THE 1953 BUICK CRANKING (STARTER) SYSTEM General Description The 1953 Buick cranking system permits the engine to be cranked by [...]
SECTION 3-H - 1953 BUICK STROMBERG 4-BARREL CARBURETOR 3-29 DESCRIPTION AND OPERATION OF 1953 BUICK STROMBERG 4-BARREL CARBURETOR General Description The 1953 Buick Stromberg Model 4AUV-267 carburetor used on the Series 70 engine is a 4-barrel Downdraft type which provides the advantages of a compound installation of two 2-barrel carburetors in one compact unit. See figure [...]
SECTION 3-G 1953 BUICK STROMBERG 2-BARREL CARBURETOR AND AUTOMATIC CHOKE NOTE: For Series 40 procedures see Section 3-G in the 1952 Buick Shop Manual 3-24 DESCRIPTION AND OPERATION OF 1953 BUICK STROMBERG 2-BARREL CARBURETOR General Description The 1953 Buick AAVB Stromberg carburetor used on Series 50 engines is a 2-barrel down draft type. See figure 3-56. [...]
SECTION 3-A 1953 BUICK ENGINE FUEL AND EXHAUST SYSTEMS SPECIFICATIONS AND GENERAL DESCRIPTION 3-1 SPECIFICATIONS, 1953 BUICK V-8 FUEL AND EXHAUST SYSTEMS General Specifications 1953 Buick Exhaust System Specifiations 1953 Buick Exhaust System Specifiation 1953 Buick Carter Carburetor and Choke Calibrations IMPORTANT: Calibrations are governed by the CODE number on the attached [...]
SECTION 10-E 1951 BUICK CRANKING (STARTER) SYSTEM 10-31 THE 1951 BUICK CRANKING (STARTER) SYSTEM General Description The 1951 Buick cranking system permits the engine to be cranked and started automatically, after the ignition has been turned on, by pressing down on the accelerator pedal. The cranking motor circuit is automatically opened and the 1951 Buick cranking motor [...]