2014 2014/11

1958 Buick Frame and Sheet Metal

2017-06-10T21:52:40+00:00By |Categories: 1958, 1958 Buick Product School Manual, Literature|Tags: , , , , , , |0 Comments

12-1 1958 BUICK FRAME Buick's Air-Poise and Coil Spring Suspensions require the use of different frames in 1958. The frames are basically the same with the exception of the construction of the front and rear cross-members. See Figure 12-1. 1958 Buick Air-Poise and Coil Spring Rear Cross-Member NOTE: [...]

2014 2014/11

1950 Buick Chassis Sheet Metal

2017-03-01T19:25:21+00:00By |Categories: 1950, 1950 Buick Shop Manual, Literature|Tags: , , , , , , , , , , , , , |0 Comments

GROUP 12 1950 BUICK CHASSIS SHEET METAL 12-1 DESCRIPTION OF 1950 BUICK CHASSIS SHEET METAL Front End Sheet Metal Assembly The front end sheet metal assembly consists of front fenders and skirts, radiator grille frame, radiator mounting strap and radiator core, radiator pan, outside air intake ducts which are attached to the fender skirts, and [...]

2014 2014/10

1950 Buick Chassis Sheet Metal Maintenance

2017-03-01T19:25:49+00:00By |Categories: 1950, 1950, 1950 Buick Product Service Bulletins Abridged Edition, Literature|Tags: , , , , , , , |0 Comments

The most satisfactory method of preventing a paint "scrubbing" condition between the hood and front fenders on 1949 Series 50 and 70 cars is to install 1950 type hood guides and spacers. This installation will also simplify hood alignment because it automatically spaces the split line between the hood and fenders. Installation is made as [...]

2014 2014/02

1957 Buick Frame and Sheet Metal Maintenance

2017-03-01T19:26:03+00:00By |Categories: 1957, 1957 Buick Product School Manual, Literature|Tags: , , , , , , |0 Comments

12-1 FRAME Frames for 1957 have been entirely redesigned. Lowering of the overall car height has been accomplished through newly designed side rails and cross-members. The new design incorporates added strength where required for the new body. The front cross-member has been revised to accommodate the new ball-joint type of front suspension and new front [...]

2014 2014/02

1950 Buick Chassis Suspension Maintenance

2017-03-01T19:26:09+00:00By |Categories: 1950, 1950, 1950 Buick Product Service Bulletins Abridged Edition, Literature|Tags: , , , , , , , |0 Comments

This section of the 1950 Buick Product Service Bulletins is about the 1950 Buick Chassis, the 1950 Buick Suspension, Maintenance and its parts. A recent production change has been made in all Series 1950 shock absorber calibrations, except Model 79. The following list shows part numbers for first and new type shock absorber assemblies and [...]

Go to Top