SECTION 7-C 1955 BUICK CHASSIS SUSPENSION SERVICE, ADJUSTMENT, AND REPLACEMENT PROCEDURES 7-8 1955 BUICK TIRE SERVICE AND INSPECTION 1955 Buick Tire Inflation and Inspection Maintenance of correct inflation pressure in all tires is one of the most important elements of tire care. Correct tire pressure is also of great importance to ease of 1955 Buick handling and riding comfort. [...]
SECTION 5-C 1955 BUICK DYNAFLOW TRANSMISSION REMOVAL AND INSTALLATION, DISASSEMBLY AND ASSEMBLY 5-13 1955 BUICK DYNAFLOW REMOVAL AND INSTALLATION Removal of 1955 Buick Dynaflow Transmission Hoist front and rear of car and rest it solidly on stands placed under frame. Frame side rail should be at least 20" above floor. Disconnect torque tube from torque ball [...]
SECTION 6-B 1954 BUICK REAR AXLE SERVICE PROCEDURES 6-4 REMOVAL AND INSTALLATION OF 1954 BUICK REAR AXLE ASSEMBLY It is not necessary to remove the 1954 Buick rear axle assembly for any of the repairs outlined in this section; however, these procedures can be used as outlined if the assembly is removed from the car. The [...]
SECTION 5-C 1954 BUICK DYNAFLOW TRANSMISSION REMOVAL AND INSTALLATION, DISASSEMBLY AND ASSEMBLY 5-13 1954 BUICK DYNAFLOW REMOVAL AND INSTALLATION 1954 Buick Dynaflow Removal Hoist front and rear of car and rest it solidly on stands placed under frame. Frame side rail should be at least 20" above floor. Disconnect torque tube from torque ball and [...]
SECTION 5-C 1952 BUICK REAR AXLE REMOVAL AND DISASSEMBLY PROCEDURES 5-7 REMOVAL AND INSTALLATION OF 1952 BUICK REAR AXLE ASSEMBLY When to Remove - 1952 Buick Rear Axle Assembly The 1952 Buick rear axle assembly should be removed from the car before overhaul if there is external indication of damage to rear axle or third member housings [...]
SECTION 4-E 1952 BUICK DYNAFLOW REMOVAL AND INSTALLATION, DISASSEMBLY AND ASSEMBLY 4-27 1952 BUICK DYNAFLOW REMOVAL Raise right side of hood and remove bell housing dowel bolt located to rear of cranking motor solenoid, using a suitable offset brass drift. This bolt cannot be removed from under the car. Hoist front and rear of car [...]
SECTION 4-E 1951 BUICK DYNAFLOW REMOVAL AND INSTALLATION, DISASSEMBLY AND ASSEMBLY 4-27 REMOVAL OF 1951 BUICK DYNAFLOW TRANSMISSION Raise right side of hood and remove bell housing dowel bolt located to rear of cranking motor solenoid, using a suitable offset brass drift. This bolt cannot be removed from under the car. Hoist front and rear [...]