SECTION 9-C 1954 BUICK BRAKE SERVICE, ADJUSTMENT, REPAIR PROCEDURES 9-7 FILLING, BLEEDING, FLUSHING 1954 BUICK BRAKE HYDRAULIC SYSTEM Filling 1954 Buick Brake Master Cylinder The 1954 Buick brake master cylinder must be kept properly filled to insure adequate reserve and prevent air from entering the hydraulic system. It must not be overfilled, however, as expansion due [...]
1954 BUICK BRAKE SPECIFICATIONS, DESCRIPTION, OPERATION CONTENTS OF SECTION 9-A 9-1 1954 BUICK BRAKE SPECIFICATIONS Tightening Specifications Use a reliable torque wrench to tighten the parts listed, to insure proper tightness without straining or distorting parts. The 1954 Buick brake specifications are for clean and lightly lubricated threads only; dry or dirty threads produce increased [...]
SECTION 10-I 1952 BUICK INSTRUMENTS AND CLOCK 10-63 1952 BUICK CHARGE INDICATOR TEMPERATURE GAUGE, OIL PRESSURE GAUGE Charge Indicator (Ammeter) The AC charge indicator located in the 1952 Buick instrument cluster is similar to an ammeter; however, the scale is not graduated in amperes, therefore the indicator does not show the amount of current flowing. The [...]
SECTION 8-A 1952 BUICK BRAKE SPECIFICATIONS, DESCRIPTION, OPERATION, SERVICE RECOMMENDATIONS 8-1 1952 BUICK BRAKE SPECIFICATIONS Tightening Specifications Use a reliable torque wrench to tighten the parts listed, to insure proper tightness without straining or distorting parts. These specifications are for clean and lightly lubricate threads only; dry or dirty threads produce increased friction which prevents [...]
SECTION 8-C 1951 BUICK BRAKE SERVICE AND ADJUSTMENT PROCEDURES 8-8 FILLING 1951 BUICK BRAKE MASTER CYLINDER The fluid level must be maintained at 1/2" to 1" below top of master cylinder filler opening at all times. Low fluid level in master cylinder reservoir may permit air to be pumped into the brake pipes and wheel [...]
SECTION 10-A ELECTRICAL SPECIFICATIONS 10-1 BATTERY SPECIFICATIONS 1956 Buick Battery Specifications 10-2 GENERATING SYSTEM SPECIFICATIONS Generator 1956 Buick Generator Specifications Generator Regulator 1956 Buick Generator Regulator Specifications 10-3 CRANKING (STARTER) SYSTEM SPECIFICATIONS 1956 Buick Cranking Specifications 10-4 IGNITION SYSTEM SPECIFICATIONS Ignition Coil 1956 [...]
SECTION 8-C 1950 BUICK BRAKE SERVICE AND ADJUSTMENT PROCEDURES 8-8 FILLING 1950 BUICK BRAKE MASTER CYLINDER The fluid level must be maintained at 1/2" to 1" below top of master cylinder filler opening at all times. Low fluid level in master cylinder reservoir may permit air to be pumped into the brake pipes and wheel [...]