1956 Buick Lubricare and Bearing Service
1956 Buick Chassis Lubrication Chart
1956 Buick Chassis Lubrication Chart
1958 Buick Chassis Lubrication Chart
SECTION 13-H 1958 BUICK LUBRICATION (ALL SERIES) 13-24 BODY PARTS LUBRICATED TWICE A YEAR (ALL SERIES) The movable mechanical hardware parts of the body were lubricated at the factory to insure proper and quiet operation. Because of the frequent use of some parts such as door locks and door lock strikers, it is important that these [...]
SECTION 13-H 1957 BUICK LUBRICATION (ALL SERIES) 13-24 BODY PARTS LUBRICATED TWICE A YEAR (ALL SERIES) The movable mechanical hardware parts of the body are lubricated at the factory to insure proper and quiet operation. Because of the frequent use of some parts such as door locks and door lock strikers, it is important that [...]
1-1 1950 Buick Bearing Service - EVERY 1000 MILES-CHASSIS AND BODY Chassis Lubricare Engine. Check engine oil level after allowing time for oil to drain down ( 5 min.) . The oil level should be maintained at all times within 1 quart of the "Full" arrow, or not lower than the middle hole in gauge [...]
1-1 1950 Buick Lubricare - EVERY 1000 MILES-CHASSIS AND BODY Chassis Lubricare Engine. Check engine oil level after allowing time for oil to drain down ( 5 min.) . The oil level should be maintained at all times within 1 quart of the "Full" arrow, or not lower than the middle hole in gauge rod. [...]
FLIPPER SEAL LUBRICARE 1952 MODELS 56R-76R Engineering tests indicate that it is advisable to insure proper operation and minimum wear of the "flipper" weather seal, used on 1952 Series 50 and 70 Riviera Coupes, by occasional lubrication. The following lubrication procedure is recommended: Open the door. Apply a coat of "Lubriplate", Group 4.683, Part No. [...]
1955 Buick Chassis Lubricare Chart
1957 Buick Chassis Lubrication Chart
For 1950 Buicks, there is a specific 1950 Buick Lubricare program. The standard chart used in the automobile industry for specifying the SAE grade of oil to use with relation to temperature conditions is as follows: Temperatures Above 320 F. As low as +10° F. As low as -10° F. Below -10° F. It has [...]