SECTION 3-A 1952 BUICK ENGINE FUEL AND EXHAUST SYSTEMS SPECIFICATIONS AND GENERAL DESCRIPTION 3-1 SPECIFICATIONS General Specifications 1952 Buick General Engine and Fuel Specifications 1952 Buick General Engine and Fuel Specification 1952 Buick Carter Carburetor and Choke Calibrations 1952 Buick Carter Carburetor and Choke Calibrations Specifications IMPORTANT: Calibrations are governed [...]
SECTION 3-C - 1953 BUICK FUEL SYSTEM ADJUSTMENT AND REPLACEMENT - EXCEPT IN PUMP AND CARBURETOR ASSEMBLIES NOTE: For Series 40 procedures see Section 3-C in the 1952 Buick Shop Manual. 3-7 AIR CLEANER, GAS FILTER, AND MANIFOLD VALVE SERVICE 1953 Buick Air Cleaner Service A 1953 Buick air cleaner with a dirty element, or with oil [...]
SECTION 3-C 1951 BUICK FUEL SYSTEM ADJUSTMENTS AND REPLACEMENTS - EXCEPT IN PUMP AND CARBURETOR ASSEMBLIES 3-7 1951 BUICK AIR CLEANER AND GAS FILTER SERVICE 1951 Buick Air Cleaner Service A 1951 Buick air cleaner with a dirty element, or with oil that is dirty, too heavy, or too high in the sump, will restrict [...]
SECTION 3-A 1951 BUICK ENGINE FUEL AND EXHAUST SYSTEMS SPECIFICATIONS AND DESCRIPTION 3-1 SPECIFICATIONS Tightening Specifications Use a reliable torque wrench to tighten the parts listed, to insure proper tightness without straining or distorting parts. These specifications are for clean and lightly lubricated threads only; dry or dirty threads produce increased friction which prevents accurate [...]
SECTION 3-C ADJUSTMENTS AND REPLACEMENTS-EXCEPT IN PUMP AND CARBURETOR ASSEMBLIES 3-7 AIR CLEANER AND GAS FILTER SERVICE Air Cleaner Service An air cleaner with a dirty element, or with oil that is dirty, too heavy, or too high in the sump, will restrict the air flow to the carburetor and cause a rich mixture at [...]
SECTION 3-A 1950 BUICK ENGINE FUEL AND EXHAUST SYSTEMS SPECIFICATIONS AND DESCRIPTION 3-1 SPECIFICATIONS Tightening Specifications Use a reliable torque wrench to tighten the parts listed, to insure proper tightness without straining or distorting parts. These specifications are for clean and lightly lubricated threads only; dry or dirty threads produce increased friction which prevents accurate [...]