2014 2014/11

1953 Buick Replacement of Engine Parts

2017-03-01T19:24:24+00:00By |Categories: 1953, 1953 Buick Shop Manual, Literature|Tags: , , , , , , , , , , , |0 Comments

SECTION 2-E - 1953 BUICK REPLACEMENT OF ENGINE PARTS - CRANKSHAFT AND CONNECTING ROD BEARINGS, PISTONS AND RINGS 2-17 REPLACEMENT OF 1953 BUICK V-8 CONNECTING ROD BEARINGS A connecting rod bearing consists of two halves or shells which are alike and interchangeable in rod and cap. When the shells are placed in rod and cap [...]

2014 2014/11

1953 Buick Cylinder Head and Valve Mechanism Service

2017-03-01T19:24:24+00:00By |Categories: 1953, 1953 Buick Shop Manual, Literature|Tags: , , , , , , , , , , , |0 Comments

SECTION 2-D - 1953 BUICK CYLINDER HEAD AND VALVE MECHANISM SERVICE 2-14 1953 BUICK V-8 CYLINDER HEAD AND VALVE SERVICE Removal of 1953 Buick Cylinder Head Drain the 1953 Buick radiator and 1953 Buick cylinder block. Remove air cleaner and silencer, then disconnect all pipes from carburetor and intake manifold. Disconnect wires from the accelerator vacuum switch and [...]

2014 2014/11

1953 Buick Engine Tune-Up and Trouble Diagnosis

2017-03-01T19:24:25+00:00By |Categories: 1953, 1953 Buick Shop Manual, Literature|Tags: , , , , , , , , , , , |0 Comments

SECTION 2-C - 1953 BUICK ENGINE TUNE-UP AND TROUBLE DIAGNOSIS                      2-9 1953 BUICK ENGINE TUNE-UP The purpose of a 1953 Buick engine tune-up is to restore power and performance that has been lost through wear, corrosion, or deterioration of one or more parts or units. In the normal operation of an engine these changes take place [...]

2014 2014/11

1953 Buick Engine Description

2017-03-01T19:24:25+00:00By |Categories: 1953, 1953 Buick Shop Manual, Literature|Tags: , , , , , , , , , , , , , , , , , , |0 Comments

SECTION 2-B 1953 BUICK ENGINE DESCRIPTION 2-4 1953 BUICK ENGINES AND MOUNTINGS Series 40 Engine The 1953 Buick Series 40 is equipped with an "F 263" 8-in-line engine similar to the one used in 1952. For 1953 Buick production, slight changes in the shape of all piston heads and cylinder head combustion chambers have provided increased [...]

2014 2014/11

1953 Buick Engine Specifications

2017-03-01T19:24:25+00:00By |Categories: 1953, 1953 Buick Shop Manual, Literature|Tags: , , , , , , , , |0 Comments

SECTION 2-A 1953 BUICK ENGINE SPECIFICATIONS 2-1 1953 BUICK ENGINE TIGHTENING SPECIFICATIONS 1953 Buick Engine Specifications - Series 40 (8-in-line) Engine See paragraph 2-1 in the 1952 Buick Shop Manual for tightening specifications on the Series 40 engine. 1953 Buick Engine Specifications- Series 50-70 (V-8) Engines Use a reliable torque wrench to tighten the parts [...]

2014 2014/11

1953 Buick Lubricare Instructions

2017-03-01T19:24:26+00:00By |Categories: 1953, 1953 Buick Shop Manual, Literature|Tags: , , , , , , , , |0 Comments

GROUP 1 - 1953 BUICK LUBRICARE INSTRUCTIONS 1-1 1953 BUICK LUBRICATION - EVERY 1000 MILES-CHASSIS AND BODY 1953 Buick Chassis Lubricare Check engine oil level only after engine has been stopped for at least three to five minutes to allow oil to drain down. The oil level should be maintained between the "FULL" and "LOW" marks [...]

2014 2014/11

1953 Buick General Information

2017-03-01T19:24:26+00:00By |Categories: 1953, 1953 Buick Shop Manual, Literature|Tags: , , , , , , , |0 Comments

1953 BUICK GENERAL INFORMATION - INTRODUCTION The 1953 Buick shop manual is divided into major Groups, Sections, and Paragraphs as explained below. The purpose of this arrangement is to bring related subjects closely together in accordance with the usual methods of performing service operations, and consequently to present information in a logical and easily understood order. Any [...]

Go to Top