1953 Buick New Specifications

1953 Buick V8 Engine Tightening Specifications

2. GENERAL SPECIFICATIONS

1953 Buick V8 Engine Specification

3. DIMENSIONS, FITS AND ADJUSTMENTS

NOTE: Applies to new parts only. “T ” means tight. “L” means Loose.

1953 Buick V8 Engine Dimensions and Adjustment

CARBURETOR AND CHOKE CALIBRATIONS

SERIES 70 V8 ENGINE

1. CARTER CARBURETOR

IMPORTANT: Calibrations are governed by the CODE number on the attached code tag.

1953 Buick Carter Carburetor Specifications

2. STROMBERG CARBURETOR

IMPORTANT: Calibrations are governed by the CODE number stamped on air hom directly above the fuel level sight plug.

1953 Buick Stromberg Carburetor Specification

ELECTRICAL SPECIFICATIONS

12 Volt System

1. BATTERY

1953 Buick Battery Specification

2. GENERATOR AND REGULATOR

1953 Buick Generator and Regulator Specifications

3. CRANKING MOTOR, SOLENOID SWITCH AND RELAY

1953 Buick Selenoid Switch and Relay Specifications

4. IGNITION COIL, SPARK PLUGS, DISTRIBUTOR

1953 Buick Ignition Coil, Spark Plugs, Distributor Specifications

5. CIRCUIT BREAKER AND FUSES

NOTE: Head, tail, parking, license, instrument and map light circuits are protected by the thermal circuit breaker on lighting switch. All fuses are mounted on fuse block under cowl, unless otherwise specified.

1953 Buick Circuit Breaker and Fuses Specifications

6. LAMP BULBS

1953 Buick Lamp Bulbs

7. HORNS AND RELAY